Audac ARES5B 2x40W 2-Way Stereo Active Speaker System

Regular Price:৳0.00
Availability: SKU: 6.87.617.9662
Quick Overview
Brand:
AUDAC
Model:
ARES5B
  • ✅ Drivers: 5¼-inch polypropylene LF driver; 13 mm PEI tweeter
  • ✅ Power Ratings: 2 × 20 W RMS/AES; 2 × 40 W dynamic
  • ✅ Frequency Response: 80 Hz–20 kHz (±3 dB)
  • ✅ Inputs: Balanced stereo Euro terminals; unbalanced 3.5 mm jacks
  • ✅ Power Supply: 100–240 V AC, 50–60 Hz
  • ✅ Configuration: Stereo pair comprising one active and one passive speaker

View More
Rating: (0 Reviews)

Share:
  • Support

    Saturday – Thursday: 09 AM - 06 PM.
  • Hotline

    0967 881 4452
  • Whatsapp

    0170 999 8397
  • Payment

    Cash on Delivery | Card | Online Payment
  • Shipping Cost

    Inside Dhaka 100tk | Outside Dhaka 150tk
  • Warranty Policy

    Read More

Description

Audac ARES5B 2x40W 2-Way Stereo Active Speaker System in Bangladesh

The Audac ARES5A/B is a two-way stereo speaker system supplied as one active speaker and one passive speaker. The supplied specifications list a 5¼-inch polypropylene low-frequency driver and a 13 mm PEI tweeter, with power ratings of 2 × 20 W RMS/AES and 2 × 40 W dynamic. The published frequency response is 80 Hz–20 kHz (±3 dB). A recessed mounting bracket is listed, and the system is described as suitable for vertical or horizontal mounting. These features make the ARES5A/B a product to consider when a paired stereo system and wall installation fit the room’s audio plan.

Active and passive speakers: The system combines an active unit with a passive companion speaker. The active speaker has a listed passive-speaker output using a 2-pin Euro terminal block, and a 3.5 m speaker connection cable is included according to the supplied accessory list. This arrangement can make the pair straightforward to plan as one system, but the connection method and cable route should still be checked against the installation instructions. Confirm that the included cable length suits the distance between the two proposed speaker positions.

The listing does not provide separate power ratings for each cabinet or explain how the amplifier’s output is allocated between them. For this reason, avoid assuming that each speaker independently receives a particular wattage. Treat the supplied figures as system ratings unless Audac confirms otherwise. If the exact division of amplifier power matters for a technical design, request clarification before using the figures in calculations.

Understanding the power figures: The product title uses “2 × 40 W,” while the specifications distinguish between 2 × 20 W RMS/AES and 2 × 40 W dynamic power. Keep these figures separate when comparing systems or discussing amplifier output. The dynamic figure is not the continuous RMS/AES rating and should not be presented as interchangeable with it. No recommended amplifier rating or limiter setting was provided in the supplied information.

The system is described as having a built-in amplifier. That is an important distinction from a pair of passive speakers that would require an external amplifier to drive both units. The supplied specifications do not detail every internal signal route or control, however, so consult the product instructions for setup and operation. Confirm the source connection, the speaker-to-speaker link and the mains connection before installation.

Two-way driver design: The supplied driver information lists a 5¼-inch polypropylene LF driver and a 13 mm PEI tweeter. These details identify the two stated driver types. They do not, on their own, guarantee how the pair will sound in a particular room. Wall position, distance between the speakers, room reflections, source quality and listening position all contribute to the result. Assess the full setup rather than choosing based on driver size alone.

The listed frequency response is 80 Hz–20 kHz within ±3 dB. This is a useful reference for comparison, but it does not provide a complete response curve or explain the measurement conditions. If your application has a particular low-frequency requirement, do not assume the response figure alone answers whether the system is suitable. Consider the content, listening level and room, and request further information if detailed acoustic performance matters to the project.

Sensitivity and maximum sound pressure: Sensitivity is listed as 89 dB at 1 W/1 m, while the maximum sound-pressure entry is 105 dB. The supplied information does not explain the measurement conditions for the maximum figure. Treat 105 dB as the listed value, not as a guaranteed level at every position in a room or a direct comparison with another speaker measured under different conditions. Sensitivity and maximum sound pressure are separate specifications; neither alone establishes how loud or evenly distributed the sound will be in a particular installation.

When assessing the ARES5A/B for a meeting room, office or other space, consider background noise, audience distance, speaker positions and required listening level. A single sound-pressure figure cannot predict the experience throughout a room without more detail about how it was measured and how the speakers are installed. If a project has defined coverage targets, use the actual room layout and seek a suitable system recommendation.

Dispersion and listening area: Horizontal dispersion is specified as 210° and vertical dispersion as 205°. Both are described as average −6 dB values over 100 Hz–10 kHz. The frequency range and averaging condition are important: the figures should not be read as uniform coverage at every frequency. Use them as planning references, then account for the room’s shape, reflective surfaces, seating arrangement and speaker orientation.

A broad dispersion specification may be useful when listeners are spread across a room, but it does not determine the number of speakers required or guarantee an even level everywhere. A long, divided or acoustically difficult room may need a different arrangement. Before mounting the pair, identify the intended listening areas and check whether the positions allow both speakers to serve them appropriately. The supplied information does not give a recommended room size or speaker spacing.

Balanced and unbalanced inputs: The balanced stereo input is specified as two 3-pin Euro terminal blocks with a 3.81 mm pitch. The unbalanced stereo inputs are listed as two 3.5 mm jacks. These connection options help when checking the system against a mixer, playback device or other audio source. The supplied specifications do not include pin assignments, supported input levels or a wiring diagram, so confirm the connection requirements before installation.

The supplied product description says balanced sources connect through the terminal-block inputs and unbalanced sources through the 3.5 mm connections. It does not explain input selection, whether different input types can be connected and used simultaneously, or how they are routed. Do not assume automatic switching or simultaneous mixing unless the product instructions confirm these functions. Match the source and cable to the documented input arrangement.

Remote connection and optional panel: An RJ45 connector is listed for remote control. The supplied description refers to an RS485 remote connection through RJ45 and mentions optional WP2xx-series wall panels; the accessory list names the WP205 as optional. The connection type should not be mistaken for a standard Ethernet or internet port simply because it uses an RJ45 connector. Confirm the panel’s compatibility, connection requirements and functions before ordering it.

The descriptive information also says that a wall panel can be used to control multiple ARES5A sets, but the supplied specifications do not define the configuration or limits. If you plan to use one panel with more than one system, ask for the supported arrangement and any setup requirements. Confirm whether the WP205 is suitable for your intended control needs rather than assuming that all functions of the WP2xx range apply to it.

Controls and standby behaviour: The supplied descriptive text mentions a rotary volume control, two-band bass and treble adjustment, and auto-standby when there is no input signal. These details are not expanded in the structured technical specifications. If you need a particular control or standby function, confirm how it works on the exact unit offered and whether it can be configured. Do not rely on an assumed control layout without checking the product documentation.

Nominal power consumption is listed as 11.3 W at “1/8 MUP,” and standby consumption is below 0.35 W. The supplied information does not explain the term “MUP,” so request clarification if you need the figure for detailed power budgeting. The standby specification is useful as a reference, but it does not explain the conditions for entering standby, how the system wakes or whether standby behaviour can be adjusted.

AC power and separate connections: The power supply is specified as 100–240 V AC at 50–60 Hz, with an IEC C7/C8 power inlet. A power cable is listed among the included accessories. This mains connection is separate from the passive-speaker output, the audio inputs and the remote-control connector. Plan each cable route according to its purpose, and follow the wiring diagram for the exact system.

The passive speaker connects through a 2-pin Euro terminal block with a 5.08 mm pitch. Balanced audio inputs use 3-pin Euro terminal blocks, while unbalanced stereo inputs use 3.5 mm jacks. Keep these connections distinct when preparing cables. The RJ45 remote connection should not be confused with an Ethernet network connection. Confirm terminal assignments and cable requirements before installation, particularly if wiring will be concealed.

Mounting options: A recessed mounting bracket is listed, along with vertical and horizontal installation. This may help adapt the pair to different wall layouts, but the supplied specifications do not give the full adjustment range or every mounting limitation. The descriptive text says the standard bracket allows horizontal aiming of up to 45° to the left or right. Confirm this detail in the installation documentation if the aiming range is important.

The supplied description also refers to an optional MBK455 angled mounting bracket for additional positioning options, including corner or ceiling installations. It is not listed among the standard included accessories. Confirm that the MBK455 is compatible with the exact ARES5A/B and intended mounting position before planning around it. A wall bracket should not be assumed suitable for every surface, corner or ceiling application without the correct installation instructions.

Dimensions, weight and mounting clearance: Dimensions are listed as 150 × 240 × 146 mm (W × H × D) without the bracket and 150 × 240 × 194 mm with the bracket. The stated weight is 3.5 kg for the pair, with no individual cabinet weights supplied. Use the bracket-inclusive depth when checking clearance from nearby fixtures and planning access to cables. Consult an installation drawing when exact dimensions or fixing positions are important.

The included items are listed as a mounting bracket, power cable, 3.5 m speaker connection cable, wall screws and plugs. Confirm that these items are included with the specific product being offered and that the supplied fixings suit the wall surface. The information does not specify approved wall materials, load limits or every fixing requirement. Check that the wall is appropriate for the installation, and ask about suitable fixings if the supplied ones are not appropriate.

Construction and finish: The enclosure is specified as ABS, the front grille as powder-coated steel with lining, and the bracket as powder-coated steel. The supplied description calls the ABS impact- and UV-resistant. These material details do not establish water resistance or an environmental protection rating. No IP rating was supplied, so do not assume the ARES5A/B is suitable for outdoor, wet or exposed locations.

The product is identified as the black variant, but the supplied colour information conflicts: one entry says black RAL9003 and another says black RAL9005. Confirm the correct finish code with BME or Audac if the system needs to match other installed equipment. This page identifies the product as black without selecting between the conflicting codes.

Potential applications: The ARES5A/B may be considered for offices, meeting rooms, classrooms, reception areas, retail spaces and other environments where a wall-mounted stereo pair fits the audio plan. These are possible applications, not a guarantee of suitable coverage in every room. Consider room dimensions, audience positions, background noise, mounting location and the type of audio being played. The supplied specifications do not give a recommended room size or speaker spacing.

For speech playback, plan the two speaker positions in relation to listeners and check that their orientation is suitable. For music or general audio, consider the desired playback level and whether the listed response meets the project’s requirements. If a room is long, divided or acoustically challenging, a single pair may not provide consistent sound at every position. Assess the actual room rather than relying on the dispersion figures alone.

Installation and testing: Before mounting, verify the model, finish code, bracket arrangement and wall-fixing requirements. Plan the mains connection, input cables and route to the passive speaker; check whether the included 3.5 m speaker cable reaches the intended position. Confirm which input type is appropriate for your source and how the remote connection will be used. Follow the installation instructions when connecting and mounting the system.

After installation, test both speakers at a moderate level using the intended source. Check that the active and passive units are connected as instructed, that stereo playback works as expected and that sound reaches the planned listening positions. If coverage is uneven, review placement and orientation before raising the volume. Testing before the space is in use can help identify a connection or placement issue while the cables remain accessible.

The supplied information lists a three-year brand warranty. Confirm the warranty issuer, coverage, eligibility and terms applicable in Bangladesh with BME. Also verify the exact finish code, package contents and any required optional accessories. These checks help make sure the ARES5A/B matches the room and equipment without assuming that optional items, environmental protection or unlisted functions are included.

✅ Key Features

  • Stereo Active/Passive Pair: Supplied as one active speaker and one passive speaker for a stereo system.
  • Two-Way Driver Design: The listed drivers are a 5¼-inch polypropylene LF driver and a 13 mm PEI tweeter.
  • Separate Power Ratings: Specifications list 2 × 20 W RMS/AES and 2 × 40 W dynamic power.
  • Balanced and Unbalanced Inputs: Includes listed balanced Euro terminal-block and unbalanced 3.5 mm jack connections.
  • Passive-Speaker Output: A 2-pin Euro terminal block is specified for the passive speaker connection.
  • Recessed Mounting Bracket: A bracket is listed for wall mounting.
  • Vertical or Horizontal Installation: Both orientations are specified; confirm adjustment limits in the installation guide.
  • Wide Listed Dispersion: Average dispersion is stated as 210° horizontal and 205° vertical over 100 Hz–10 kHz at −6 dB.
  • Remote-Control Connection: An RJ45 remote connector is listed; it should not be assumed to be a network port.
  • Included Accessories: The supplied list includes a bracket, power cable, 3.5 m speaker cable, screws and plugs.
  • Three-Year Brand Warranty Listed: Confirm the warranty issuer, coverage and Bangladesh terms with BME.

✅ Usage / Applications

  • Meeting Rooms: Consider for stereo playback after checking placement and coverage.
  • Office Spaces: Assess for speech or general audio using compatible source connections.
  • Classrooms and Training Rooms: Plan the pair around room size and listener positions.
  • Reception Areas: Consider where a wall-mounted stereo system suits the listening area.
  • Retail Spaces: Evaluate for stereo audio after confirming the installation and input requirements.
  • Wall-Mounted Stereo Setups: Use where vertical or horizontal mounting fits the available wall space.
  • Balanced Audio Installations: Match the Euro terminal inputs to the intended source.
  • Unbalanced Audio Setups: Confirm the appropriate use of the two 3.5 mm input connections.
  • Remote-Panel Projects: Check WP205 compatibility and functions before ordering the optional panel.
  • System Upgrades: Verify the active/passive arrangement, cable lengths and mounting requirements before replacement.

✅ Benefits of This Product?

  • Stereo Pair in One System: Combines one active and one passive speaker in the specified system.
  • Flexible Wall Placement: Vertical and horizontal mounting options support different room layouts.
  • Input Options to Check: Balanced and unbalanced connections provide choices to assess against source equipment.
  • Clearer Power Comparisons: Separate RMS/AES and dynamic figures help prevent confusing ratings.
  • Included Speaker Cable: The listed 3.5 m connection cable may simplify installation when the distance suits.
  • Bracket-Based Mounting: A recessed bracket is specified for the wall-mounted setup.
  • Useful Coverage References: Listed dispersion figures can inform placement decisions.
  • Defined Power Requirements: The AC input range and standby consumption support preliminary planning.
  • More Informed Installation: Confirming finish, remote connection and bracket requirements helps reduce assumptions.

✅ Ideal For

The Audac ARES5A/B is ideal for buyers planning a two-way stereo system with one active and one passive speaker, particularly where wall mounting suits the room. Its balanced and unbalanced inputs, included passive-speaker cable and vertical or horizontal mounting options may suit offices, meeting rooms, classrooms, reception areas and retail spaces. The driver, response and dispersion details offer starting points for comparing the pair with the planned listening area.

It is best suited to purchasers who can verify input routing, wall mounting and cable requirements before installation. Keep the 2 × 20 W RMS/AES and 2 × 40 W dynamic figures distinct. Confirm the black finish code because the supplied RAL entries conflict, and check the function and compatibility of the optional WP205 wall panel or MBK455 bracket if either is required. Ask BME to confirm the listed three-year warranty’s terms in Bangladesh.

✅ Why Choose the Audac ARES5A/B 2-Way Stereo Active Speaker System?

The ARES5A/B is worth considering when a project needs a two-way stereo system supplied as one active and one passive speaker. The listed 5¼-inch polypropylene LF driver and 13 mm PEI tweeter provide specific driver information for comparison, while the stated frequency response of 80 Hz–20 kHz (±3 dB) and sensitivity of 89 dB at 1 W/1 m help frame an initial assessment. The room, source, positioning and installation still determine the finished result.

The connection options are another point to evaluate. Balanced stereo input uses two 3-pin Euro terminal blocks, and unbalanced stereo input is listed through two 3.5 mm jacks. A passive-speaker output is specified, and the active unit has a separate RJ45 remote-control connector. Confirm how inputs are selected or routed and what the remote connection supports; the RJ45 connector should not be assumed to be Ethernet.

The included mounting bracket, 3.5 m speaker cable and vertical or horizontal mounting options provide useful details for planning the installation. The ratings need to be read carefully: the supplied data gives 2 × 20 W RMS/AES and 2 × 40 W dynamic. The black finish code is also inconsistent in the supplied information. Confirm these details, the package contents and any optional accessories before ordering. If the pair configuration, inputs, mounting and coverage suit your room, the ARES5A/B is a considered system to evaluate.

✅ Why Buy This Product from BME?

For buyers in Bangladesh, contact BME to enquire about the Audac ARES5A/B and confirm the product and purchase details currently offered. No price or availability is confirmed in this page, so ask BME for a quote and the terms that apply to your order. Confirm any delivery or collection arrangements directly rather than assuming they are available.

Use your enquiry to check the exact black variant and clarify the conflicting RAL9003 and RAL9005 finish entries if a precise colour match matters. You can also confirm package contents, including the mounting bracket, power cable, 3.5 m speaker cable, screws and plugs. If you need the optional WP205 wall panel or MBK455 mounting bracket, ask about compatibility, connection requirements and whether they are included or need to be ordered separately.

The supplied information lists a three-year brand warranty. Confirm its issuer, coverage, eligibility and terms applicable in Bangladesh with BME before purchase. These checks help you compare the exact system with your room, source equipment and installation plan without assuming availability, accessories or services.

✅ Buying Guide

  • Confirm the Model and Finish: Check that the product is ARES5A/B and clarify the black RAL code.
  • Understand the Power Ratings: The listing gives 2 × 20 W RMS/AES and 2 × 40 W dynamic; they are distinct ratings.
  • Plan the Active/Passive Pair: Check speaker positions and whether the included 3.5 m link cable is long enough.
  • Match the Inputs: Confirm whether your source uses the balanced Euro terminal inputs or unbalanced 3.5 mm jacks.
  • Check Input Behaviour: The supplied data does not confirm whether input types can be used simultaneously.
  • Review the Remote Connection: RJ45 is specified for remote control; do not assume it is Ethernet.
  • Verify Optional Accessories: Confirm WP205 or MBK455 compatibility and availability if needed.
  • Measure the Mounting Space: Check the bracket-inclusive dimensions and suitability of the wall surface.
  • Confirm Package Contents: Verify the listed cable, bracket, screws and plugs with BME.
  • Check Warranty Terms: Confirm the listed three-year brand warranty’s issuer, coverage and local terms.

✅ Customers Ask About / Frequently Asked Questions

Q: What is the Audac ARES5A/B price in Bangladesh?
A: Contact BME for a current quote and the terms applicable to your order.

Q: Is the ARES5A/B a pair of active speakers?
A: The supplied information describes one active speaker and one passive speaker.

Q: What do 2 × 20 W and 2 × 40 W refer to?
A: The specifications list 2 × 20 W as RMS/AES power and 2 × 40 W as dynamic power. They are different ratings.

Q: Which drivers are specified?
A: The supplied details list a 5¼-inch polypropylene LF driver and a 13 mm PEI tweeter.

Q: What input connections are listed?
A: Two 3-pin Euro terminal blocks are listed for balanced stereo, and two 3.5 mm jacks for unbalanced stereo.

Q: Can both input types be used at the same time?
A: The supplied specifications do not confirm simultaneous use or input-routing behaviour. Check the product documentation.

Q: Is the RJ45 connector an Ethernet port?
A: It is listed for remote control. The supplied information does not identify it as an Ethernet or internet port.

Q: What is included with the system?
A: The supplied accessory list includes a mounting bracket, power cable, 3.5 m speaker cable, wall screws and plugs. Confirm the package contents with BME.

Q: Is the WP205 wall panel included?
A: It is listed as optional. Confirm its compatibility and functions if you need one.

Q: What is the correct black RAL code?
A: The supplied information lists both RAL9003 and RAL9005. Ask BME to confirm the finish code of the product offered.

Q: Can the speakers be mounted vertically or horizontally?
A: Both orientations are listed. Confirm the bracket’s adjustment range and installation requirements.

Q: What warranty is listed?
A: The supplied information lists a three-year brand warranty. Confirm the issuer, coverage and Bangladesh terms with BME.

✅ Why Buy This Product

Consider the Audac ARES5A/B if you need a two-way stereo system with one active and one passive speaker, flexible wall-mounting options and balanced or unbalanced input connections. Its driver details, frequency response, dispersion figures and included speaker cable provide useful starting points for checking whether the pair fits your room and source equipment.

Before ordering, confirm the active/passive connection, cable length and input behaviour. Keep the 2 × 20 W RMS/AES and 2 × 40 W dynamic ratings distinct, and clarify the black finish code because the supplied RAL entries conflict. Check whether the optional WP205 wall panel or MBK455 bracket is suitable if you need either. For current product and purchase information in Bangladesh, contact BME and confirm the exact product and applicable terms.

What is the price of Audac ARES5B 2x40W 2-Way Stereo Active Speaker System in Bangladesh?

The latest price of Audac ARES5B 2x40W 2-Way Stereo Active Speaker System in Bangladesh is ৳0.00 . You can buy the Audac ARES5B 2x40W 2-Way Stereo Active Speaker System at best price from BME ONLINE SHOP, Bangladesh.

Write a review

Question Answer

Have question about this product? Get specific details about this product from expert.