The Audac COM104 is a 40 W public address mixing amplifier with a Class-D design and a black steel construction. Its supplied specifications list one balanced microphone input, one stereo unbalanced line input and a priority mute contact. The output connector is a 4-pin Euro terminal block, and the output voltage/impedance entry lists 100 V, 70 V and 4 Ω. Confirm how these output options are configured on the exact unit before planning the speaker connections.
A compact PA mixing format. The COM104 combines a microphone input and stereo line input in a single amplifier, according to the supplied product information. It may be considered when a small PA system needs these source types, but the information does not specify controls, mixing behaviour or signal-routing options. Check the product documentation to understand how the inputs are adjusted and combined, particularly if your setup depends on a specific source priority or output arrangement.
Rated output. The listed RMS/AES output is 1 × 40 W at 4 Ω. The separate voltage/impedance entry reads “100/70 V / 4 Ω.” Because the supplied details do not explain whether these are selectable output arrangements or how they map to the terminals, verify the exact operating modes with the product documentation. Do not assume that all three options are available simultaneously or that every speaker load is supported.
Matching speakers and wiring. Before connecting speakers, compare their impedance and wiring requirements with the COM104’s documented output configuration. Check whether the installation uses a 4 Ω load or a line-voltage connection, and confirm the correct output terminals for that mode. The supplied specifications do not state a recommended speaker count or provide a wiring diagram. If multiple speakers are involved, have the full system arrangement checked against the amplifier and speaker documentation.
Microphone input. One balanced microphone input is specified. Its connector is a 3-pin Euro terminal block with 3.81 mm pitch. Check the microphone’s connector and signal requirements before preparing a cable or installation. The supplied information does not identify an included microphone or cable, so confirm what is needed to connect your equipment. Do not assume that an XLR plug connects directly without suitable wiring or an appropriate cable.
Microphone sensitivity notation. The supplied microphone sensitivity entry reads “−0 dB to +50 dB.” The reference and interpretation of that notation are not explained. If you need to set gain or compare the input with a microphone’s output specification, consult the product documentation or ask BME to clarify the figure. Avoid treating it as a particular unit or gain range without confirmation.
Line input. The amplifier has one stereo unbalanced line input. The listed connector options are RCA and 3.5 mm jack, and the supplied sensitivity entry reads “−4 dB to +20 dBv.” The information does not explain whether these connectors are alternative ways to access the same input or how the sensitivity range is referenced. Check the source device’s output and the amplifier’s instructions before connecting it.
Phantom power. A 15 V DC phantom-power specification is listed for the balanced microphone input. Confirm how phantom power is supplied or enabled, and check whether it matches the requirements of the microphone you intend to use. Do not assume that every microphone needs phantom power or that the specification applies to any other input. Follow the instructions for both the amplifier and microphone to avoid a connection mismatch.
Priority mute contact. A priority mute contact is listed. This can be relevant if the PA setup needs a contact-based mute function, but the supplied information does not explain its wiring, trigger method or effect on the input signals. If the system requires a particular priority behaviour, confirm how the contact operates and which external controls are needed. Do not assume the amplifier includes an automatic paging sequence or a particular mute configuration.
Output connection. The specified output connector is a 4-pin Euro terminal block with 5.08 mm pitch. The listed output voltage/impedance is 100 V, 70 V and 4 Ω, but the supplied details do not identify the terminal assignments or connection procedure. Read the labels and current wiring instructions for the exact unit before connecting speakers. Confirm that the cable and terminal spacing suit the installation; the product details do not state that speaker cable is included.
Audio performance. The frequency response is listed as 20 Hz to 20 kHz within ±3 dB. Signal-to-noise is specified as greater than 90 dB. THD+N is listed as less than 0.5% at 1 kHz and half rated power, while crosstalk is greater than 70 dB at 1 kHz. These figures are useful for product comparison. If a value is important to a project, check the manufacturer’s documentation for its measurement conditions and compare like-for-like specifications.
Class-D technology and power supply. Class-D is the listed amplification technology, and the power supply is specified as switching mode. The AC input range is given as 100–240 V at 50–60 Hz. The details do not state whether the input range is automatically selected or requires any setting, so confirm the requirements of the exact unit before connecting it. Do not infer a specific power-selection method from the input range alone.
Protection features. The supplied list includes amplifier DC, short-circuit, overheating and overload protection, as well as signal limiting. These are useful details when evaluating the amplifier for a PA system. They do not remove the need to use compatible speakers, make connections correctly and follow the manufacturer’s operating instructions. The product information does not describe protection thresholds or responses, so consult the manual if a particular protection behaviour matters to your installation.
Cooling and operating conditions. The COM104 is specified as convection cooled. Plan its location according to the manufacturer’s ventilation instructions, and avoid blocking any required airflow. The listed operating conditions are 0 °C to 40 °C at 95% humidity. The supplied information does not explain the humidity measurement conditions. Check the operating guidance against the planned environment; this specification is not an ingress-protection rating.
Mounting options. The amplifier is listed for tabletop use or installation in a half-width 19-inch, 1 HE format. A 19-inch rackmount adapter is identified as optional, not included as standard in the supplied details. If you plan to install it in a rack, confirm the correct adapter, compatibility and availability before ordering. For tabletop use, choose a stable position that allows access to connections and meets the manufacturer’s ventilation requirements.
Dimensions and weight. The listed dimensions are 217.5 × 43.7 × 300 mm (W × H × D), and the stated weight is 3 kg. Use these figures to check available space and cable access. If using a rack, allow for the optional adapter as well as cabling and any clearance specified in the product instructions. The dimensions alone do not confirm that a particular rack or shelf is suitable.
Construction and finish. The cabinet is specified as steel and the colour as black. These details may help when planning a tabletop or rack installation alongside other equipment. The supplied product information does not describe the front-panel layout, controls or included cables, so confirm any operational or package details that matter to your setup before purchase.
Potential applications. The COM104 may be evaluated for compact PA arrangements that need one balanced microphone input and one stereo line input, subject to confirming the output mode and connected speakers. Possible settings to assess include small meeting areas, reception points, classrooms or other spaces with a straightforward announcement or audio requirement. These are examples for consideration, not guarantees of room coverage. The suitability of the amplifier depends on the speaker system, room, required sound level and installation design.
Planning a compact system. List the sources you intend to connect, their output types and the speakers you plan to use. Match the microphone to the balanced input and the line source to the RCA or 3.5 mm connection identified for the stereo input. Then verify the output configuration, speaker load, priority-mute requirements and cable types. This check helps identify missing adapters or control connections before installation.
Questions to resolve before purchase. The microphone and line sensitivity entries use notations whose references are not explained in the supplied information. The output entry lists 100 V, 70 V and 4 Ω without explaining how each mode is selected. Confirm these details if they affect the system design. Also check whether the optional rackmount adapter is needed and what accessories or cables are included with the exact unit.
Purchase and service details. The supplied specifications do not state a warranty period, country of manufacture or package contents beyond the optional adapter detail. Ask BME to confirm the current quotation and any written terms that matter to your purchase. If delivery, installation or another service is required, ask whether it is available for your location and what conditions apply rather than assuming that it is included.
Choosing the COM104. The Audac COM104 is best assessed as a 40 W Class-D PA mixing amplifier with one balanced microphone input, one stereo unbalanced line input and a priority mute contact. Its listed output options, frequency response, protection features, wide AC input range and compact mounting format provide comparison points for system planning. Confirm the exact output arrangement, connections and installation requirements before ordering so the amplifier matches the equipment and site.
✅ Key Features
✅ Usage / Applications
✅ Benefits of This Product?
✅ Ideal For
The Audac COM104 may suit buyers planning a compact public address system that needs one balanced microphone input and one stereo unbalanced line input. Its 40 W rating, Class-D design and listed priority mute contact provide useful details to compare with a small PA setup. The half-width 19-inch, 1 HE format or tabletop placement may also be relevant where installation space is limited.
It is best considered by buyers prepared to verify the amplifier’s output arrangement and input requirements before purchase. The supplied output specification lists 100 V, 70 V and 4 Ω, but does not explain how those options are selected or mapped to the terminals. Confirm the microphone phantom-power requirements, sensitivity references and line-input connectors as well. If rack mounting is planned, note that the 19-inch rackmount adapter is listed as optional.
✅ Why Choose the Audac COM104 40W Public Address Class-D Mixing Amplifier?
The Audac COM104 is worth considering when a compact PA system needs a 40 W Class-D amplifier with a balanced microphone input and a stereo line input. Its listed 3-pin Euro terminal microphone connection and RCA/3.5 mm line-input options give buyers specific connection details to compare with their source equipment. A 15 V DC phantom-power specification and priority mute contact are also listed, although their exact setup and operation should be checked.
The product information provides useful performance figures, including a 20 Hz–20 kHz response, signal-to-noise greater than 90 dB and THD+N below 0.5% at 1 kHz and half rated power. It also lists crosstalk above 70 dB at 1 kHz, plus DC, short-circuit, overheating and overload protection and signal limiting.
Its compact dimensions and half-width 19-inch, 1 HE or tabletop format may be helpful when planning an installation. The 19-inch rackmount adapter is listed as optional, so confirm whether it is needed and included in the quoted package.
The output specification lists 100 V, 70 V and 4 Ω but does not explain the modes or terminal assignments. The input-sensitivity notations also need clarification if they affect system setup. The COM104 is a stronger candidate when its confirmed connections, output configuration and mounting requirements align with the intended PA system.
✅ Why Buy This Product from BME?
When enquiring with BME about the Audac COM104, describe the speakers and audio sources you plan to connect, then ask for the current quotation. The supplied output details list 100 V, 70 V and 4 Ω, but do not explain how the modes are selected or how the output terminals are assigned. If your project depends on a particular connection, ask for confirmation before ordering.
You may also want to clarify the microphone and line sensitivity references, phantom-power operation and priority mute wiring. If rack mounting is planned, check whether the optional 19-inch rackmount adapter is available and included in the quoted configuration. Confirm the package contents and any applicable written warranty terms, as these details are not provided in the specifications.
If delivery, installation or another service matters to your purchase, ask BME whether it is available for your location and what terms apply. Do not assume a service or warranty is included unless confirmed. Checking the exact unit, output configuration and purchase conditions first helps you make an informed decision.
✅ Buying Guide
✅ Customers Ask About / Frequently Asked Questions
Q: What is the Audac COM104 price in Bangladesh?
A: Contact BME for the current quotation.
Q: What is the rated output?
A: The supplied specification lists 1 × 40 W RMS/AES at 4 Ω.
Q: What inputs does the COM104 have?
A: It lists one balanced microphone input and one stereo unbalanced line input.
Q: Which connectors are listed for the inputs?
A: The microphone input uses a 3-pin Euro terminal block; the line input lists RCA and 3.5 mm jack connections.
Q: Does it provide phantom power?
A: A 15 V DC phantom-power specification is listed for the balanced microphone input. Confirm its operation and suitability for your microphone.
Q: Does it have a priority function?
A: A priority mute contact is listed. The supplied details do not explain its wiring or operation.
Q: Does the output support 100 V, 70 V and 4 Ω?
A: Those options appear in the supplied output specification, but the terminal mapping and configuration are not explained. Confirm with the product documentation.
Q: Is the COM104 suitable for rack mounting?
A: It is listed for half-width 19-inch, 1 HE or tabletop use. The rackmount adapter is optional.
Q: What mains input is specified?
A: The supplied details list 100–240 V AC at 50–60 Hz. Confirm the exact unit’s requirements before connection.
Q: Where can I enquire about the COM104 in Bangladesh?
A: Contact BME for the current quotation and to confirm the exact model and configuration.
✅ Why Buy This Product
The Audac COM104 is a compact PA mixing amplifier to consider when a setup needs one balanced microphone input, one stereo line input and a listed 40 W output rating. Its Class-D design, 15 V DC phantom-power specification, priority mute contact and protection features provide useful details for comparison. The half-width rack or tabletop format may also suit installations where space is limited.
Before buying, confirm how the listed 100 V, 70 V and 4 Ω output options are configured, and match the amplifier to your speakers. Check the microphone and line-input requirements, phantom-power suitability and priority contact operation. If you need rack mounting, remember that the adapter is listed as optional.
If the confirmed configuration fits your system, contact BME to verify the exact product and purchase terms before ordering.
Have question about this product? Get specific details about this product from expert.