The Audac CENA506/W is a white, 5-inch broadband ceiling speaker with a SpringFit mounting system. Its supplied specifications list a full-range driver, a 93 dB sensitivity rating at 1 W/1 m, two transformer tap entries and a stated 8 Ω impedance for the CENA506 model. The speaker is intended for ceiling installation, with a 150 mm cut-out and an overall size of 180 × 60 mm. The product information also lists a borderless, finely perforated steel grille and SnapConnect.
Two details in the supplied data need checking before purchase: it lists both SnapConnect and a screw-terminal connection, and it does not state the nominal line voltage for the transformer taps. It also identifies the 8 Ω impedance as applying to “CENA506,” so confirm that it applies to the CENA506/W variant. These entries are not assumed to describe interchangeable modes or a particular wiring arrangement.
A 5-inch broadband driver: The CENA506/W is specified as a broadband speaker with one 5-inch full-range driver. This provides a concise description of its driver configuration; the supplied details do not list separate high- and low-frequency drivers. For a system designer, the broadband specification is useful when considering whether one ceiling-mounted speaker is appropriate for the intended type of audio. The actual result will still depend on the room, placement, amplifier and source material.
The frequency response is listed as 100 Hz–15 kHz within ±3 dB, with an extended range of 80 Hz–18 kHz at −10 dB. The two figures use different tolerances, so they should not be treated as equivalent ranges with the same response level. They provide reference points for comparison, but they do not describe the speaker’s complete frequency-response curve or predict its performance in every room. Ask for further measurements if a detailed acoustic comparison is important.
Sensitivity and sound-pressure information: Sensitivity is specified as 93 dB at 1 W/1 m. The supplied data separately records maximum sound pressure as 103 dB at 100 V. The test conditions and notation for that maximum figure are not fully explained, so do not compare it directly with another product’s maximum SPL unless measurement methods and conditions match. Sensitivity and the maximum sound-pressure entry are separate specifications; neither should be used alone to determine expected coverage in a particular room.
The listed conical dispersion is 155°. This is a useful planning reference when considering speaker spacing and the areas listeners need to cover. It does not, by itself, determine how many speakers a room requires or guarantee uniform volume throughout the space. Ceiling height, room shape, background noise, listener position and speaker orientation all influence coverage. For a multi-speaker installation, plan and test the actual layout rather than selecting spacing based only on the dispersion figure.
Power handling: The CENA506/W specifications give three separate power-handling figures: 10 W RMS/AES, 20 W program and 40 W peak. Keep the ratings distinct when assessing an amplifier and the intended use. The 40 W peak rating is not a continuous-power rating and should not be substituted for the 10 W RMS/AES figure. The supplied information does not provide recommended amplifier power, limiter settings or a complete system-design guide, so check amplifier compatibility with the supplier or system designer.
Impedance and transformer taps: The specification lists an impedance of 8 Ω for the CENA506 model and lists transformer tap entries of 6 W / 1,667 Ω and 3 W / 3,333 Ω. It does not state the nominal line voltage for those taps or explain how the transformer and 8 Ω entry relate in this variant. Confirm the complete wiring and operating configuration before connecting the speaker. In particular, do not assume a 70 V or 100 V system from the tap values alone.
This check matters when the speaker is being added to an existing installation. Confirm the amplifier type, output mode, speaker connection and any required tap selection before wiring. If multiple speakers are planned, make sure their configuration matches the amplifier’s requirements. The product data supplied for this page is not sufficient to prescribe a particular amplifier connection or system load.
SpringFit mounting: The product is described with Audac’s SpringFit mounting system, and the feature list presents the system as designed for fast installation. Its cut-out requirement is listed as 150 mm in diameter. The speaker’s overall dimensions are 180 mm in diameter by 60 mm deep, with a built-in depth of 57 mm. Check both the opening and the clearance above the ceiling before installation. Allow for obstructions such as beams, ducts, wiring or other equipment.
The dimension and cut-out figures help with planning, but they do not specify every mounting condition. The supplied information does not state the permitted ceiling thickness, whether a template is included, or what ceiling materials are suitable. Confirm the installation instructions and mounting limits before cutting an opening. Do not assume that the speaker will fit every ceiling or that SpringFit removes the need to check support, clearance and safe installation practice.
Connection details to verify: SnapConnect is listed as a key feature and connection type, while a separate specification line identifies a screw terminal. The information does not explain whether these describe parts of the same connection assembly or different versions. Do not guess which connector will be present on the unit offered. Confirm the exact connection arrangement, the required cable preparation and whether a terminal or connector accessory is included before planning an installation.
The feature list describes SnapConnect as enabling a fast and reliable connection. That is a stated product benefit, but connection speed and ease still depend on access, cable preparation and the specific installation. If you are fitting multiple speakers, confirm the intended connection procedure for the exact model and use the manufacturer’s instructions. A clear understanding of the connection also helps with future maintenance or replacement.
Finish and construction: The housing is specified as ABS, and the front is described as a borderless, finely perforated steel grille. The white CENA506/W finish is identified as RAL9003. These details can help when coordinating the speaker with a ceiling or other installed equipment. The supplied information does not state that the grille or enclosure has a special environmental rating, so colour and construction should not be taken as evidence of weather resistance.
The CENA506/W is listed with an operating temperature range of −15°C to 55°C. No IP rating or water-resistance specification was supplied. The temperature range alone does not establish suitability for outdoor, damp or exposed installations. If the installation site has moisture, dust or other environmental challenges, ask for the applicable protection information before selecting the speaker.
Possible installation settings: A ceiling speaker of this type may be considered for background audio or speech playback in spaces such as offices, reception areas, retail premises, corridors, classrooms and meeting rooms. These are potential applications, not a guarantee that one speaker or a particular number of speakers will provide suitable coverage. Room size, ceiling height, ambient noise, speech intelligibility requirements and the chosen amplifier all matter. Confirm that the speaker’s ratings and connection arrangement suit the intended system.
For speech-focused installations, consider where listeners will be seated or standing and whether the proposed positions fall within the coverage pattern. In a room with long corridors, dividing walls or unusually high ceilings, a single speaker may not be sufficient. For background music, check whether the response range and desired listening level meet the project’s needs. The supplied information does not include a recommended coverage area or spacing guide, so ask the supplier or system designer for a layout appropriate to the room.
Amplifier and system planning: The specifications do not list a built-in amplifier. Plan for a suitable external amplifier or an existing audio system, and confirm its output arrangement before connecting the speaker. Match the amplifier to the speaker’s verified impedance or transformer configuration and use the correct connection method. Do not choose an amplifier solely from the 40 W peak figure or assume the transformer tap voltage.
A multi-speaker system needs additional planning. Confirm how many speakers will be connected, how they will be wired and whether the amplifier can support the resulting load. For transformer use, verify the line voltage and tap settings with the manufacturer’s documentation. For an 8 Ω connection, confirm that the speaker variant and amplifier are compatible. These checks help avoid mismatched system configurations and make it easier to plan future expansion.
Installation and commissioning: Start by checking the intended speaker position, ceiling construction, cut-out size and available depth. Locate wiring and other services before cutting the ceiling. Confirm which connection method is present on the CENA506/W being installed, and ensure the cable and amplifier are suitable for it. Fit the speaker according to its installation instructions; do not rely on the product name alone to determine ceiling compatibility.
After installation, test the system at a conservative level and listen from the areas where people will use the room. Check that all speakers work, that the sound is appropriately balanced and that there is no unexpected distortion. If several speakers are installed, compare their output across the space. Adjust the system using suitable equipment and guidance rather than increasing the amplifier level to compensate for poor placement or an unsuitable layout.
Warranty and purchasing checks: The supplied product information lists a three-year brand warranty. Confirm the warranty issuer, eligibility, coverage and applicable terms in Bangladesh with BME. Also check the exact model, connection arrangement, transformer voltage and included accessories before ordering. The supplied data gives useful information about the speaker’s size, driver, response and power ratings, but those checks are important for ensuring it matches the existing or planned audio system.
Overall, the Audac CENA506/W combines a 5-inch broadband driver, a SpringFit ceiling-mounting system, a white finish and published power and response figures. It can be considered for a compatible ceiling-audio installation once coverage, amplifier matching and mounting conditions are established. Before purchase, resolve the connector discrepancy, confirm that the 8 Ω figure applies to the /W model and verify the transformer line-voltage requirements. This makes the CENA506/W easier to assess against the actual site and audio system rather than relying on assumptions.
✅ Key Features
✅ Usage / Applications
✅ Benefits of This Product?
✅ Ideal For
The Audac CENA506/W is ideal for buyers planning a ceiling-audio installation who need a white 5-inch broadband speaker with a defined cut-out size and published power-handling figures. It may suit offices, reception areas, shops, classrooms or meeting rooms when the speaker’s coverage and response are appropriate for the space and the connected amplifier. Its SpringFit mounting system and listed 155° conical dispersion are useful considerations for installation planning.
It is best suited to purchasers who can verify the electrical configuration and ceiling requirements before ordering. The supplied data lists an 8 Ω impedance for CENA506 and transformer taps, but does not state the tap voltage or explain their relationship. It also lists both SnapConnect and a screw terminal. Confirm these details for the CENA506/W variant, along with the ceiling thickness and required clearance. Do not assume an IP rating or outdoor suitability; neither was supplied.
✅ Why Choose the Audac CENA506/W SpringFit 5-inch Ceiling Speaker?
The CENA506/W offers a practical set of specifications for assessing a ceiling speaker: a 5-inch broadband driver, 93 dB sensitivity at 1 W/1 m, 155° conical dispersion and a published frequency response of 100 Hz–15 kHz within ±3 dB. An extended response of 80 Hz–18 kHz at −10 dB is also listed. These figures help you compare the speaker with the requirements of a room, while the actual result will depend on amplifier choice, placement and acoustics.
Its SpringFit mounting system, 150 mm cut-out and 180 × 60 mm overall dimensions provide useful starting points for checking the ceiling installation. The listed white RAL9003 finish and finely perforated borderless grille may also suit projects where a discreet ceiling appearance is wanted. Power handling is stated separately as 10 W RMS/AES, 20 W program and 40 W peak; keeping these ratings distinct is important when matching an amplifier.
The CENA506/W is most compelling when its installation and connection details match your system. The supplied data lists both SnapConnect and a screw terminal, identifies 8 Ω for CENA506 and gives transformer taps without a nominal line voltage. Confirm those points before choosing the speaker. If the verified connection, amplifier arrangement and ceiling fit meet your requirements, it is a worthwhile option to evaluate for a compatible ceiling-audio project.
✅ Why Buy This Product from BME?
For buyers in Bangladesh, BME is a place to enquire about the Audac CENA506/W and confirm current product and purchase details. No current price or availability is stated in this page, so contact BME for a quote and terms applicable to your order. Confirm delivery or collection arrangements directly rather than assuming they are available.
Use your enquiry to verify the exact model and the electrical details that matter to your installation. Ask whether the 8 Ω specification applies to the CENA506/W, which connector is fitted, and what nominal line voltage the transformer taps are intended for. You can also confirm whether any mounting or connection accessories are included. If the installation depends on a particular ceiling thickness or clearance, request the relevant fitting guidance before ordering.
The supplied product information lists a three-year brand warranty. Confirm its issuer, coverage, eligibility and Bangladesh terms with BME. These checks help you assess the exact speaker being offered against your amplifier, wiring and ceiling layout without relying on assumptions about compatibility or included accessories.
✅ Buying Guide
✅ Customers Ask About / Frequently Asked Questions
Q: What is the Audac CENA506/W price in Bangladesh?
A: Contact BME for the current quote and purchase terms.
Q: What size is the driver?
A: It is specified as a 5-inch full-range driver in a broadband speaker.
Q: What is the required ceiling cut-out?
A: The supplied specification lists a 150 mm diameter cut-out. Check the installation guide and available ceiling clearance before cutting.
Q: What are the CENA506/W power ratings?
A: The supplied figures are 10 W RMS/AES, 20 W program and 40 W peak. These ratings are not interchangeable.
Q: Is the speaker 8 Ω?
A: An 8 Ω impedance is listed for CENA506. Confirm that it applies to the CENA506/W and how it relates to the listed transformer taps.
Q: Does it support 70 V or 100 V systems?
A: Transformer taps are listed, but the nominal line voltage is not supplied. Confirm the intended voltage rather than assuming one.
Q: Which connector does it use?
A: The information lists SnapConnect and screw terminal. Ask BME to confirm the actual connection arrangement on the offered unit.
Q: What is its frequency response?
A: The listed response is 100 Hz–15 kHz (±3 dB), with a range of 80 Hz–18 kHz at −10 dB.
Q: Is the CENA506/W waterproof or suitable for outdoor use?
A: No IP rating or weather-resistance specification was supplied. Do not assume outdoor suitability.
Q: What colour is this model?
A: It is specified as white, RAL9003.
Q: What warranty is listed?
A: The supplied details list a three-year brand warranty. Confirm its coverage and local terms with BME.
✅ Why Buy This Product
Consider the Audac CENA506/W if you need a 5-inch broadband ceiling speaker and its dimensions, response and power ratings fit your project. The SpringFit mounting system, 150 mm cut-out and listed 155° conical dispersion offer useful starting points for installation and coverage planning. Its white RAL9003 grille may also suit a ceiling where a low-profile appearance is preferred.
Before ordering, verify the exact connection arrangement, whether the 8 Ω specification applies to the /W variant and the nominal voltage of the transformer taps. Check the ceiling clearance and amplifier compatibility, and do not treat the 40 W peak rating as continuous power. For current purchase information in Bangladesh, contact BME and confirm the exact model and applicable terms. If the verified specifications match your system, enquire with BME about the CENA506/W.
Have question about this product? Get specific details about this product from expert.