The Audac COM24MK2 is a 240 W public address amplifier in a black finish, specified as a Class-D model with a transformer power supply. The supplied information identifies it as the UK version. Its listed features include balanced microphone/line inputs, an unbalanced stereo line input, priority-related functions and output connections on Euro terminal blocks. It can be evaluated for a PA installation when its input, output, power and mounting requirements match the system design.
Rated power and output details. The amplifier is specified at 240 W RMS/AES. Its output voltage and impedance are listed as “100 V / 4 Ω.” The supplied details do not explain whether these describe alternative output modes, how the terminals correspond to them or which configurations are supported. Confirm the precise output arrangement in the product documentation before connecting speakers. Do not assume that a 70 V output or any additional load condition is supported, as neither is stated in the information provided.
Class-D amplification. Class-D is the listed amplifier technology. This is useful when comparing the COM24MK2 with other PA amplifiers, but the technology label alone does not establish power consumption, operating efficiency or suitability for a particular installation. Match the amplifier to the speakers, their loads and the required output level. The supplied information does not give a recommended speaker configuration, so check the full system design before purchase and installation.
Frequency response and audio specifications. The listed frequency response is 20 Hz to 20 kHz within ±3 dB. Signal-to-noise is specified as greater than 90 dB, THD+N as less than 0.5% at 1 kHz, and crosstalk as greater than 70 dB at 1 kHz. Common-mode rejection ratio is listed as 70 dB. These values can support a technical comparison; where a figure matters to a project, check the manufacturer’s documentation for its measurement conditions.
Balanced microphone/line inputs 1–4. Four balanced microphone/line inputs are specified, with the supplied input-level notation “-6 dB / -50 dB.” The listed connectors are two XLR/Jack combo sockets and two XLR connectors. The information does not explain the reference for the level figures or how they are selected. Check the input documentation and connector assignments when matching microphones, line-level sources and cables to the amplifier.
Phantom power and priority details. The specification lists “4 × 15 V DC Phantom” and “2 × Priority” in relation to the first group of microphone inputs. It does not detail which channels have phantom power, how priority is assigned or what controls these functions. Confirm those details for the exact configuration before connecting microphones or planning a priority workflow. In particular, verify phantom-power requirements for any microphones you intend to use.
Balanced microphone/line input 5. A fifth balanced microphone/line input is listed, with the same “-6 dB / -50 dB” notation and a 6.3 mm jack connector. The supplied details do not state whether this input has the same phantom-power or priority functions as inputs 1–4. Check the product documentation before assuming that input 5 behaves identically or accepts the same equipment in the same way.
Unbalanced stereo line input. The amplifier also lists one unbalanced stereo line input on RCA connectors, with the level notation “+14 dB / -30 dB.” The reference and exact meaning of these figures are not explained in the supplied information. Check the source-device output and the amplifier’s input instructions before connecting equipment, and confirm whether the expected source is stereo or how the amplifier handles that signal in the PA setup.
Priority and paging features. The additional functions named in the specification include a remote microphone described as “Priority mic + chime,” tele-paging described as “Priority line,” and a priority mute contact. These entries indicate priority-related connections or functions, but the supplied details do not explain how they are triggered, configured or assigned. If your project depends on a particular paging or mute behaviour, confirm the required controls, connections and operating method before choosing this amplifier.
Output connectors. Two output connector types are listed: a 2-pin Euro terminal block and a 10-pin Euro terminal block, both with 5.08 mm pitch. The provided information does not give the terminal assignments or explain how each connector relates to the listed 100 V / 4 Ω output specification. Review the rear-panel labels and current wiring documentation before installation. Do not assume that every terminal serves the same output or that a particular connector is intended for a specific speaker type without confirmation.
Protection and signal limiting. The listed protection features are DC, short circuit, overheating and overload protection, as well as signal limiting. These are useful specifications to review when comparing PA amplifiers. They do not remove the need to match the speaker load, follow the wiring instructions or operate the amplifier within its stated requirements. The supplied details do not describe protection thresholds or how the amplifier responds in each condition, so consult the manual if those behaviours matter to the system design.
Convection cooling. The COM24MK2 is specified as convection cooled. When planning a rack or tabletop position, follow the manufacturer’s ventilation and clearance guidance; do not block any airflow paths. The supplied information does not provide a fan-noise figure or a detailed ventilation clearance, so check the installation instructions for the exact requirements. Allow space for cables and access as well as the amplifier’s physical dimensions.
Rack and tabletop use. The unit is listed for 19-inch, 2 HE rack mounting or tabletop placement. A 19-inch rackmount adapter is included. Its stated dimensions are 420 × 88 × 320 mm (W × H × D), and its weight is 11 kg. Use these measurements to check available rack space, depth, support and access. Confirm whether any additional rack hardware is required for your intended setup; the supplied details identify the adapter but do not list every possible fixing or accessory.
Mains input and UK version. The specified AC source is 230–240 V at 50–60 Hz. Since the product is identified as the UK version, confirm the mains input and power connection for the exact unit being offered. The information does not state the plug type or describe any voltage-selection procedure. For a Bangladesh installation, ask BME to confirm the unit’s power requirements and connection details rather than assuming that the version or its input specification resolves every local setup question.
Operating conditions. The listed operating temperature is 0 °C to 40 °C at 95% humidity. The supplied information does not clarify the humidity measurement conditions. If the installation site has demanding temperature or humidity conditions, check the manufacturer’s guidance for the complete operating environment. This operating-condition entry should not be treated as an ingress-protection rating or as proof that the amplifier is suitable for a damp or exposed location.
Potential PA applications. A public address amplifier may be considered for a system that distributes announcements or other audio through compatible speakers. The COM24MK2’s multiple mic/line inputs, stereo line input and named priority functions give integrators details to examine for that kind of setup. These specifications do not establish a particular room size, speaker count or coverage area. Those depend on the system design, output connections, speaker loads and the needs of the site.
Planning a paging workflow. If your setup uses a remote microphone, tele-paging or a priority mute contact, verify how each function connects and operates. The supplied information names these features but does not specify control wiring, trigger behaviour or configuration steps. Do not assume the amplifier provides a particular chime pattern, paging procedure or automatic priority sequence beyond what its documentation confirms. Check that the desired microphones, paging source and control contacts are compatible with the exact unit.
Before installation. Identify the source equipment, microphones and speakers you plan to use. Confirm their connectors and signal levels, the amplifier’s input assignments and the speaker output arrangement. Check the 100 V / 4 Ω specification carefully with the manual, and verify that the intended load and wiring are supported. If a project requires 70 V operation, confirm compatibility separately because it is not listed in the supplied specifications.
Purchase details to verify. The information supplied does not state a warranty period, country of manufacture or package contents beyond the rackmount adapter. Ask BME to confirm details that matter to your purchase, including what is included with the exact unit. If delivery, installation or another service is important, ask whether it is available for your location and what terms apply rather than assuming it is included.
The Audac COM24MK2 is best assessed by checking its 240 W rating, input requirements, priority connections, output specification and mains configuration against the intended PA system. Its rack or tabletop mounting options, listed protection features and convection cooling provide further installation details to consider. Confirm the specific terminal assignments and operating requirements before purchase so the amplifier fits the speakers, source equipment and site.
✅ Key Features
✅ Usage / Applications
✅ Benefits of This Product?
✅ Ideal For
The Audac COM24MK2 may suit organisations or system integrators planning a public address setup that needs a 240 W amplifier and several microphone or line-source connections. Its four balanced Mic/Line inputs, separate fifth balanced Mic/Line input, stereo RCA line input and listed priority-related functions provide details to compare with a paging or announcement workflow. The 19-inch, 2 HE rack format and tabletop option may also help when planning where the amplifier will be installed.
It is best considered by buyers who can verify the speaker-output arrangement, input levels, priority controls and mains configuration before purchase. The supplied output entry is “100 V / 4 Ω,” and its exact terminal mapping is not explained here. The unit is identified as the UK version with a 230–240 V AC input; confirm the exact power connection and installation requirements for your site.
✅ Why Choose the Audac COM24MK2 240W Public Address Amplifier?
The Audac COM24MK2 is worth considering when a PA installation needs an amplifier rated at 240 W RMS/AES and several input options. The supplied specifications list four balanced Mic/Line inputs, a fifth balanced Mic/Line input and an unbalanced stereo RCA line input. This gives system planners useful connection information to compare with their microphones and audio sources, while the priority microphone, tele-paging and mute-contact entries may be relevant to paging requirements.
The amplifier also provides useful technical data for review, including a 20 Hz–20 kHz frequency response, signal-to-noise greater than 90 dB, THD+N below 0.5% at 1 kHz and crosstalk greater than 70 dB at 1 kHz. Its listed DC, short-circuit, overheating and overload protection, plus signal limiting, are further points to consider when comparing equipment.
For installation planning, the model supports a 19-inch, 2 HE rack format or tabletop placement, and a rackmount adapter is listed as included. It is convection cooled, so placement should follow the manufacturer’s ventilation guidance. The UK version is specified for 230–240 V AC at 50–60 Hz; verify the exact unit’s power requirements before use.
The key step is to confirm the output terminals and the stated “100 V / 4 Ω” connection information against the amplifier documentation. Check the input-level references, phantom-power allocation and priority operation as well. The COM24MK2 is a better-informed choice when its confirmed connections and power configuration match the speakers, sources and installation.
✅ Why Buy This Product from BME?
When enquiring with BME about the Audac COM24MK2, provide details of your planned PA system and ask for the current quotation. You can confirm that the offered unit is the UK version and check its stated 230–240 V AC, 50–60 Hz input against your intended installation. Ask about the power connection for the exact unit rather than assuming it from the model name.
The supplied output specification reads “100 V / 4 Ω,” but does not explain the terminal mapping or operating conditions. Ask for clarification if your system depends on a particular output mode or speaker load. You may also want to verify microphone input assignments, phantom-power availability, priority functions and package contents. A 19-inch rackmount adapter is listed as included; other accessories are not specified.
Warranty, delivery, installation and other services are not described in the product details. Ask BME whether any service you need is available for your location and what terms apply. Confirm the exact model, power configuration and purchase terms before ordering.
✅ Buying Guide
✅ Customers Ask About / Frequently Asked Questions
Q: What is the Audac COM24MK2 price in Bangladesh?
A: Contact BME for the current quotation.
Q: What is the amplifier’s rated power?
A: The supplied specification lists 240 W RMS/AES.
Q: How many microphone/line inputs are listed?
A: Four balanced Mic/Line inputs are listed, along with a separate fifth balanced Mic/Line input.
Q: What other audio input is available?
A: One unbalanced stereo line input on RCA connectors is specified.
Q: Does it have priority or paging functions?
A: The details list a remote mic with priority mic and chime, tele-paging with priority line, and a priority mute contact. Confirm how these operate.
Q: What speaker output does it support?
A: The supplied specification states “100 V / 4 Ω.” Confirm the terminal mapping and supported configuration in the product documentation.
Q: Does it support 70 V speaker systems?
A: 70 V output is not specified in the supplied details. Verify compatibility before purchase if your system requires it.
Q: Can it be rack mounted?
A: Yes. A 19-inch, 2 HE format is listed, and a rackmount adapter is included. Tabletop use is also specified.
Q: What power supply is listed for the UK version?
A: The supplied source is 230–240 V AC at 50–60 Hz. Confirm the power connection for the exact unit.
Q: Where can I check the current purchase details in Bangladesh?
A: Contact BME to confirm the quotation and details of the exact amplifier being offered.
✅ Why Buy This Product
The Audac COM24MK2 is a public address amplifier to consider when your system needs a 240 W rated unit with several balanced microphone/line inputs, a stereo RCA line input and listed priority-related functions. Its 19-inch, 2 HE rack format and tabletop option provide practical placement details, while the supplied protection and performance specifications help with product comparison.
Before ordering, confirm the output-terminal mapping for the listed “100 V / 4 Ω” specification, and check that the amplifier matches your speakers and system design. Verify the phantom-power allocation, input-level references and priority controls if your setup depends on them. Since this is the UK version, also confirm the exact unit’s 230–240 V AC power connection for your location.
If the confirmed configuration fits your PA system, contact BME to check the exact product and purchase details before ordering.
Have question about this product? Get specific details about this product from expert.