The Audac CENA506/B is a black, 5-inch broadband ceiling speaker with a SpringFit mounting system. The supplied specifications list a full-range driver, 93 dB sensitivity at 1 W/1 m, 155° conical dispersion and separate power-handling ratings of 10 W RMS/AES, 20 W program and 40 W peak. These are useful starting points when assessing the speaker for a compatible ceiling-audio installation. The specifications also list transformer taps and an 8 Ω impedance for “CENA506”; confirm how those entries apply to the CENA506/B before connecting it.
A ceiling speaker for a planned audio system: The CENA506/B is designed for ceiling installation, with a stated 150 mm cut-out and overall dimensions of 180 mm in diameter by 60 mm deep. It is not specified as a self-powered speaker, so plan for a suitable amplifier or existing audio system. Amplifier choice, connection and speaker layout should be based on the exact electrical configuration confirmed for this variant—not on the product name or a single power rating.
Driver and speaker type: The product is described as a broadband speaker with one 5-inch full-range driver. This identifies the listed driver arrangement but does not, by itself, establish the speaker’s sound in a particular room or its suitability for every type of programme material. Placement, ceiling height, room acoustics, amplifier settings and the source signal all affect the outcome. Consider the CENA506/B in relation to the intended listening area and confirm that a ceiling-mounted broadband speaker fits the project.
Frequency response: The specified response is 100 Hz–15 kHz within ±3 dB, with a wider range of 80 Hz–18 kHz at −10 dB. These ranges have different tolerances and should not be treated as equivalent. They provide published reference points for comparison, but not a complete response curve or a guarantee of how the speaker will sound in a finished installation. If the project depends on a particular tonal response or detailed acoustic performance, request further manufacturer information.
Sensitivity and maximum sound-pressure entry: Sensitivity is specified as 93 dB at 1 W/1 m. The supplied listing separately gives a maximum sound-pressure figure of 103 dB at 100 V, but its field wording and measurement conditions are not fully clear. Preserve that figure as supplied, and avoid using it for a direct comparison with another speaker unless the measurement conditions match. Sensitivity and the maximum sound-pressure entry are separate specifications; neither alone determines the coverage or listening level in a particular room.
Distinct power ratings: The CENA506/B’s power handling is listed as 10 W RMS/AES, 20 W program and 40 W peak. Keep these ratings distinct when selecting an amplifier or planning the system. The 40 W peak figure is not a continuous-power rating and should not be substituted for the RMS/AES rating. The information supplied does not give recommended amplifier power, limiter settings or a full system-design guide. Check amplifier compatibility using the confirmed speaker configuration and guidance for the complete system.
Transformer taps require clarification: The listing gives two entries under line transformer tappings: 6 W / 1,667 Ω and 3 W / 3,333 Ω. It does not state the nominal line voltage for these taps or explain how they relate to the separately listed 8 Ω impedance. The maximum sound-pressure entry includes “@ 100 V,” but that does not, on its own, establish the intended voltage for the transformer taps. Confirm the wiring, operating voltage and connection method with BME or the manufacturer before connecting the speaker.
This check is particularly important when adding the CENA506/B to an existing distributed-audio system. Confirm whether the amplifier output and speaker configuration match, how the correct connection or tap is selected, and whether the planned number of speakers is supported. Do not assume 70 V or 100 V operation from the tap entries alone. Nor should the 8 Ω figure be assumed to describe every possible configuration without confirmation.
Impedance and amplifier matching: An impedance of 8 Ω is listed for CENA506, rather than explicitly for CENA506/B. Confirm that this value applies to the black /B model before using it to select or connect an amplifier. The correct setup depends on the speaker variant, the amplifier’s output mode and whether the installation uses the transformer taps or another connection arrangement. For a multi-speaker system, the total load and wiring plan matter too. Do not decide the amplifier load from the 40 W peak rating.
Dispersion and layout: The listed conical dispersion is 155°. This provides a reference for considering speaker placement and the area listeners need to cover. It does not specify how many speakers a room requires or guarantee uniform sound throughout the space. Room shape, ceiling height, furniture, background noise and listening positions affect coverage. Use the dispersion figure as one input to layout planning, then assess the actual room. Where dependable speech coverage or even playback is important, request a system layout suited to the site.
SpringFit installation and clearances: The speaker uses the listed SpringFit mounting system, which the product information presents as an installation-time-saving feature. The specified ceiling cut-out is 150 mm in diameter. Overall dimensions are 180 × 60 mm (diameter × depth), and built-in depth is listed as 57 mm. Check the ceiling opening and space above it against the installation instructions. Because the overall and built-in depth figures differ, consult the product drawing when precise clearance is important.
Before cutting an opening, check for joists, ducts, cabling, insulation and other equipment above the ceiling. The supplied details do not state the permitted ceiling thickness, the ceiling materials suitable for SpringFit or whether a cut-out template is included. Verify these points and follow the installation instructions. SpringFit should not be taken to mean the speaker fits every ceiling or that checks for safe support and clearance are unnecessary.
Connection details: SnapConnect is identified in the key features and as a connection type, while a separate specification line says “Connection: Screw terminal.” The supplied information does not explain whether these refer to parts of the same assembly or different connection options. Do not guess which connection is fitted to the CENA506/B. Confirm the exact connector, cable requirements and connection procedure before planning installation, particularly if the speaker must match existing wiring or be fitted alongside several units.
SnapConnect is described as enabling a fast and reliable connection. That is a supplied product claim; the actual installation process still depends on access, cable preparation and the specific connection arrangement. Check the product instructions for cable stripping, connection and any other requirements. Correctly identifying the connector first can also make future maintenance and replacement easier.
Construction and black finish: The enclosure is specified as ABS, with a borderless, finely perforated steel grille. The CENA506/B finish is listed as black, RAL9005, which may suit dark ceilings or an installation where a lighter grille would stand out. Finish and construction help with appearance and physical planning, but the information supplied does not give a special environmental protection rating. Do not assume the black finish makes the speaker suitable for outdoor or wet locations.
The stated operating temperature range is −15°C to 55°C. No IP rating, moisture protection or dust protection was supplied. Check environmental requirements for the intended location, and ask for further information if the speaker will be installed somewhere exposed or unusually humid. A temperature range alone does not establish weather resistance.
Potential installation settings: The CENA506/B may be considered for offices, meeting rooms, retail premises, reception areas, classrooms and other spaces with a suitable ceiling-audio system. These are possible applications, not a recommendation for a particular room size or number of speakers. Assess the listener positions, ambient noise, ceiling height, required playback level and amplifier configuration. The supplied specifications do not include a recommended coverage area or a guide to speaker spacing.
For speech playback, consider whether the layout directs sound to the people who need to hear it. In a larger or acoustically challenging room, one ceiling speaker may not be enough. For background audio, check that the response and intended listening level meet the project’s needs. Plan the number and position of speakers against the actual room rather than assuming the listed 155° dispersion guarantees coverage everywhere.
Installation and commissioning: Begin by confirming the speaker variant, the cut-out size, available depth and the connection method. Locate ceiling services before cutting, and confirm whether the amplifier and speaker are configured for the same impedance or transformer arrangement. If the job involves several speakers, have the total load and wiring checked. Use the manufacturer’s installation guidance rather than inferring wiring from a connector name or transformer-tap entry.
After fitting, test the system at a moderate level from several listening positions. Check that the speaker works correctly, the sound is appropriate for the space and no unexpected distortion is present. In multi-speaker installations, compare coverage across the room. Increasing amplifier level is not a substitute for correcting poor placement, unsuitable settings or a mismatched system.
The supplied product information lists a three-year brand warranty. Confirm the warranty issuer, coverage, eligibility and terms applicable in Bangladesh with BME. Also verify the exact model, connection arrangement and transformer voltage before ordering. The CENA506/B’s driver, mounting and response specifications provide useful planning information, but those checks are important for ensuring it matches the amplifier and ceiling installation.
✅ Key Features
✅ Usage / Applications
✅ Benefits of This Product?
✅ Ideal For
The Audac CENA506/B is ideal for buyers planning a ceiling-audio installation who want a black 5-inch broadband speaker with a listed SpringFit mounting system. Its 150 mm cut-out, 155° conical dispersion and published power and frequency-response figures can help with initial planning for an office, meeting room, shop, reception area or classroom. The RAL9005 finish may also suit a darker ceiling design.
It is best suited to buyers who can verify the electrical configuration and ceiling requirements before ordering. The data lists an 8 Ω impedance for CENA506, not explicitly for CENA506/B, and gives transformer taps without stating their nominal line voltage. It also lists both SnapConnect and screw terminal. Confirm these details, the available clearance and the correct amplifier arrangement for the exact unit. No IP rating was supplied, so do not assume it is suitable for outdoor or wet locations.
✅ Why Choose the Audac CENA506/B SpringFit 5-inch Ceiling Speaker - Black?
The CENA506/B offers a practical set of specifications to assess for a ceiling-speaker project: a 5-inch broadband driver, 93 dB sensitivity at 1 W/1 m, 155° conical dispersion and a listed response of 100 Hz–15 kHz within ±3 dB. An extended range of 80 Hz–18 kHz at −10 dB is also supplied. These figures help frame a comparison, while actual performance depends on placement, acoustics and the complete audio system.
Its SpringFit mounting system and specified 150 mm cut-out provide useful details when checking whether the speaker will fit the planned ceiling. The stated overall dimensions, built-in depth and black RAL9005 finish can help with physical and visual planning. Its power ratings are clearly separated: 10 W RMS/AES, 20 W program and 40 W peak. Keeping those ratings distinct is important when discussing an amplifier; peak power should not be treated as continuous power.
The key reason to consider this model is a match with your installation—not simply its finish or driver size. The supplied information lists SnapConnect and screw terminal, an 8 Ω impedance for CENA506, and transformer taps without a stated nominal line voltage. Confirm how each applies to the CENA506/B before connecting it. If the verified wiring, amplifier and ceiling requirements suit your project, this speaker is a considered option for a compatible ceiling-audio system.
✅ Why Buy This Product from BME?
For buyers in Bangladesh, contact BME to enquire about the Audac CENA506/B and confirm current product and purchase details. No current price or availability is stated on this page, so ask BME for a quote and the terms applicable to your order. Confirm any delivery or collection arrangements directly rather than assuming they are available.
Use your enquiry to verify the exact model and electrical details for the unit being offered. Ask whether the 8 Ω specification applies to the /B variant, which connection is fitted, and what nominal line voltage the transformer taps support. If the installation depends on a particular ceiling thickness or clearance, request the relevant fitting information before ordering. You can also check which accessories, if any, are included.
The supplied product information lists a three-year brand warranty. Confirm its issuer, coverage, eligibility and terms applicable in Bangladesh with BME. These checks help you compare the exact speaker against your amplifier, wiring and ceiling layout without assuming that unlisted accessories or features are included.
✅ Buying Guide
✅ Customers Ask About / Frequently Asked Questions
Q: What is the Audac CENA506/B price in Bangladesh?
A: Contact BME for the current quote and purchase terms.
Q: What size is the driver?
A: The supplied specifications list a 5-inch full-range driver.
Q: What is the ceiling cut-out size?
A: The listed cut-out is 150 mm in diameter. Check the installation instructions and available ceiling clearance before cutting.
Q: What are the speaker’s power ratings?
A: It is listed at 10 W RMS/AES, 20 W program and 40 W peak. These ratings are not interchangeable.
Q: Is the CENA506/B an 8 Ω speaker?
A: An 8 Ω impedance is listed for CENA506. Confirm that it applies to the CENA506/B variant.
Q: Can I connect it to a 70 V or 100 V system?
A: Transformer taps are listed, but their nominal line voltage is not specified. Confirm the intended voltage and wiring rather than assuming either system.
Q: Which connector does it use?
A: The supplied information lists both SnapConnect and screw terminal. Ask BME to confirm the connection arrangement on the unit offered.
Q: What is the frequency response?
A: It is listed as 100 Hz–15 kHz (±3 dB), with a wider range of 80 Hz–18 kHz at −10 dB.
Q: Is the CENA506/B waterproof or suitable for outdoors?
A: No IP rating or weather-resistance specification was supplied. Do not assume it is suitable for exposed or wet locations.
Q: What colour is the /B model?
A: It is specified as black, RAL9005.
Q: What warranty is listed?
A: The supplied information lists a three-year brand warranty. Confirm its issuer, coverage and Bangladesh terms with BME.
✅ Why Buy This Product
Consider the Audac CENA506/B if you need a black 5-inch broadband ceiling speaker and its published dimensions, response and power ratings suit your project. Its SpringFit mounting system, 150 mm cut-out and 155° conical dispersion provide useful starting points for assessing installation and coverage. The RAL9005 finish may also suit a darker ceiling.
Before ordering, confirm which connection is fitted, whether the 8 Ω specification applies to the /B variant and the intended voltage for the transformer taps. Check the ceiling clearance and amplifier configuration, and do not treat the 40 W peak rating as continuous power. For current purchase information in Bangladesh, contact BME and confirm the exact model and applicable terms. If the verified specifications match your setup, enquire with BME about the CENA506/B.
Have question about this product? Get specific details about this product from expert.