The Audac ATEO2/B is a compact black wall speaker with a 2-inch aluminium full-range driver and Audac’s CleverMount mounting system. Its supplied specifications list 10 W RMS/AES, 20 W program and 40 W peak power handling, along with horizontal and vertical dispersion figures and an IP40 rating. An optional WTR06 transformer is listed for 6 W, 100 V line use. These details make the ATEO2/B a speaker to assess for a suitable installed-audio system, once the exact electrical configuration and mounting requirements have been confirmed.
Confirm the model variant: The product listing identifies the model as ATEO2/B, while the impedance entry says “8 Ω (ATEO2).” The supplied information does not explicitly confirm that this impedance applies to the /B variant. Verify it before selecting or connecting an amplifier. The optional WTR06 transformer is a separate accessory, not a confirmed standard part of the speaker package.
Full-range driver: The ATEO2/B is specified as a full-range speaker with one 2-inch aluminium driver. That describes the listed driver type; it does not establish how the speaker will sound in every room or cover every kind of programme material. The result depends on placement, room surfaces, background noise, the amplifier and the audio source. Consider the intended use and listening area when deciding whether a compact full-range speaker suits the system.
Frequency response: The listed frequency response is 120 Hz–20 kHz within ±3 dB. A wider range of 100 Hz–20 kHz is supplied at −10 dB. Because these figures use different tolerances, they should not be read as equivalent response ranges. They provide reference points for comparison, but do not give a complete response curve or guarantee a particular tonal character in an installed room.
The listed low-frequency limit is a useful reminder to assess the speaker against the sound required. If an installation needs substantial bass, ask whether a separate system component is appropriate rather than assuming this compact speaker will provide it. No subwoofer specification or system recommendation was supplied for this model.
Sensitivity and maximum sound pressure: Sensitivity is listed as 83 dB at 1 W/1 m. The maximum sound-pressure entry is 93 dB, but the supplied data does not clearly explain its complete measurement reference or test conditions. Treat that figure as supplied and avoid directly comparing it with another product unless the measurement methods are known to match. Sensitivity and maximum sound pressure are separate specifications, and neither alone determines the coverage or listening level in a particular room.
Separate power ratings: Power handling is listed as 10 W RMS/AES, 20 W program and 40 W peak. Keep these figures distinct when assessing an amplifier or planning a system. The 40 W peak rating is not a continuous-power rating and should not be substituted for the 10 W RMS/AES figure. Recommended amplifier power and limiter settings were not provided, so check compatibility with the amplifier documentation and the confirmed speaker configuration.
Impedance and optional transformer: An 8 Ω impedance is listed for “ATEO2,” but the information does not confirm whether it applies unchanged to the ATEO2/B. Confirm the specification for the exact variant before using it for amplifier matching. The optional WTR06 is described as a 6 W, 100 V line transformer. It is not listed as included, and the supplied information does not specify 70 V operation. If you need the 100 V option, verify that the WTR06 is compatible with the speaker and confirm how it should be installed and connected.
If you are planning a multi-speaker system, check the amplifier output, the connection method and the total system load. Do not assume that the optional transformer is fitted or that the speaker can be connected in every configuration without checking its instructions. For a low-impedance setup, confirm the speaker’s applicable impedance; for a 100 V setup, confirm the WTR06 requirements and the correct system wiring. These checks are important before connecting equipment.
Dispersion and coverage: The supplied specifications list 145° horizontal and 170° vertical dispersion. These figures can help frame speaker-placement discussions, but they do not guarantee even coverage throughout a room or define the number of speakers required. Wall position, mounting height, room shape, furniture and listener locations all affect what people hear. Use the dispersion figures as planning references, then assess the actual space and intended listening areas.
CleverMount installation: The ATEO2/B uses the CleverMount mounting system, identified in the supplied information as patented. The product is described as suitable for vertical or horizontal mounting. This flexibility can be useful when the layout or available wall space calls for different orientations. The specifications do not provide a complete installation procedure, wall-material requirements or a list of all included mounting parts. Check the installation instructions and package contents before choosing a mounting position.
The listed inclination angles are 25° left, 25° right, 25° at the bottom and 15° at the top. The supplied information does not explain the reference orientation for these values, so do not interpret them as a guaranteed adjustment range without checking the mounting documentation. If a specific speaker angle is essential, verify how the CleverMount system supports that position before installation.
Compact dimensions: The speaker measures 80 × 136 × 115 mm (W × H × D) and weighs 0.390 kg. These measurements can help with planning a discreet wall-mounted installation, clearance and cable access. Check the dimensions against the intended wall position, nearby fixtures and the route for the speaker cable. The supplied data does not state mounting-hole details or the space needed to access the connection terminal.
Connection and system planning: A 2-pin Euro terminal block is listed as the connector. This identifies the stated connection type, but the supplied information does not include a wiring diagram or describe the pin assignment. Confirm the correct connection method for the exact speaker and any optional transformer before wiring. A connector that fits physically does not, by itself, confirm that the amplifier and speaker are electrically compatible.
The specifications do not list a built-in amplifier. Plan for a suitable external amplifier or existing audio system, and confirm how the speaker should connect to it. Do not select an amplifier using the peak figure alone. If the system uses multiple speakers, have the total load and wiring arrangement checked against the amplifier’s specifications. Ask for guidance if you are unsure whether the system should use the listed impedance or the optional WTR06 transformer.
Enclosure and finish: The enclosure is specified as ABS, with a steel grille at the front. The ATEO2/B finish is black RAL9005. These details can help when coordinating the speaker with wall finishes or other equipment. The material and colour do not establish weather resistance, so do not assume the speaker is suitable for outdoor, wet or exposed locations.
IP40 rating: The supplied listing identifies the speaker as IP40. This rating indicates protection against solid objects larger than 1 mm; it does not indicate water protection. Do not interpret IP40 as waterproof or weatherproof. If the speaker will be installed where moisture or outdoor exposure is possible, confirm the suitability of the exact product for that environment before purchase.
Operating environment: The listed operating temperature range is −20°C to 60°C. A separate storage-temperature range is not supplied. The temperature specification does not replace the IP40 limitation or establish suitability for every installation environment. Check that the planned location meets the manufacturer’s requirements, particularly if it is exposed to moisture, dust or other conditions beyond a typical indoor setting.
Possible applications: The ATEO2/B may be considered for offices, reception areas, meeting rooms, retail spaces and other locations where a compact wall speaker suits the audio design. These are potential uses, not guarantees of room coverage. Assess the listening area, ambient noise, required sound level, mounting position and connected amplifier. The supplied specifications do not state a recommended room size or speaker spacing, so plan against the actual space.
For speech playback, consider whether the mounting position directs sound toward listeners. For general audio, assess whether the published response and power ratings suit the content and listening level. Larger, noisy or acoustically challenging rooms may require a different arrangement or additional equipment. Do not assume that one compact speaker will cover a whole room simply because its listed dispersion is broad.
Installation planning: Before mounting, confirm the exact model, wall location, orientation, cable route and clearance. Check the connector and applicable electrical configuration before wiring. If you need the optional 100 V transformer, confirm the WTR06 accessory and its installation requirements first. Follow the manufacturer’s instructions for the mounting surface and fastening method; the supplied information does not establish that every wall type or installation method is suitable.
Commissioning and testing: After installation, test the speaker at a moderate level through the intended audio system. Listen from the planned audience positions and check that the sound is appropriate for the room. If the installation includes multiple speakers, confirm that each one operates and that the overall wiring and amplifier load match the system plan. Increasing amplifier level is not a substitute for correcting poor placement or an unsuitable configuration.
The listing names a three-year brand warranty, but warranty coverage and eligibility in Bangladesh were not provided. Confirm the applicable terms with BME before ordering. Also check whether the optional WTR06 transformer or any other required mounting or wiring accessories are included; the WTR06 is specifically listed as optional.
Overall, the Audac ATEO2/B is a compact wall speaker with a 2-inch aluminium full-range driver, CleverMount mounting, an IP40 rating and specified low-impedance information that needs confirmation for the /B variant. Its small dimensions and wide listed dispersion may suit some installed-audio layouts, while the optional WTR06 provides a stated 6 W, 100 V line option to verify. Confirm the impedance, transformer compatibility, connection and wall requirements before choosing it for a particular system.
✅ Key Features
✅ Usage / Applications
✅ Benefits of This Product?
✅ Ideal For
The Audac ATEO2/B is ideal for buyers who need a compact wall speaker with a 2-inch aluminium full-range driver and a CleverMount mounting system. Its small size and listed horizontal and vertical dispersion may suit some offices, reception areas, meeting rooms and retail spaces, provided the speaker’s output and coverage fit the room. The optional WTR06 transformer may also be relevant to a 100 V system when its compatibility and installation requirements are confirmed.
It is best suited to buyers who can verify the exact electrical setup before ordering. The 8 Ω specification is shown for ATEO2 rather than explicitly for ATEO2/B, and the WTR06 is optional, not confirmed as included. Check the connector, amplifier match and intended wall position. Its IP40 rating does not indicate water protection, so do not assume suitability for outdoor or damp installations.
✅ Why Choose the Audac ATEO2/B Compact Wall Speaker with 2" CleverMount?
The Audac ATEO2/B offers a compact form with a defined driver and mounting specification. Its 2-inch aluminium full-range driver, 145° horizontal dispersion and 170° vertical dispersion give useful reference points when considering a wall-mounted audio layout. The supplied frequency response is 120 Hz–20 kHz within ±3 dB, with 100 Hz–20 kHz at −10 dB. These figures help with preliminary comparison, while the room, speaker position and connected system determine the result.
CleverMount and the option to mount vertically or horizontally are practical features to review when wall space or orientation matters. The speaker’s dimensions of 80 × 136 × 115 mm and weight of 0.390 kg also help with physical planning. The listed IP40 rating makes its environmental limitation clear: it does not provide water protection. This is important when deciding whether the planned location is appropriate.
The WTR06 accessory is listed as an optional 6 W, 100 V line transformer. If you need that arrangement, confirm compatibility and installation details; do not assume the accessory is included or that 70 V operation is supported. Similarly, verify whether the 8 Ω specification listed for ATEO2 applies to the ATEO2/B. If the confirmed electrical configuration and coverage suit your installation, this compact speaker is a considered option for the system.
✅ Why Buy This Product from BME?
For buyers in Bangladesh, contact BME to enquire about the Audac ATEO2/B and confirm current product and purchase details. No current price or availability is stated on this page, so ask BME for a quote and the terms applicable to your order. Confirm any delivery or collection arrangements directly rather than assuming they are available.
Use your enquiry to check the exact model and its connection requirements. In particular, confirm whether the listed 8 Ω impedance applies to the ATEO2/B and whether the optional WTR06 6 W, 100 V transformer is compatible with your intended setup. You can also ask what mounting parts are included and what instructions apply to the wall surface and speaker orientation.
The product information lists a three-year brand warranty. Confirm its issuer, coverage, eligibility and terms applicable in Bangladesh with BME before ordering. These checks can help you compare the speaker with your amplifier, wiring and installation location without relying on assumptions about accessories, environmental protection or compatibility.
✅ Buying Guide
✅ Customers Ask About / Frequently Asked Questions
Q: What is the Audac ATEO2/B price in Bangladesh?
A: Contact BME for the current quote and purchase terms.
Q: What type of driver does it have?
A: It is specified as a 2-inch aluminium full-range driver.
Q: Is the ATEO2/B an 8 Ω speaker?
A: The supplied impedance entry says 8 Ω for ATEO2. Confirm that it applies to the ATEO2/B before connecting it.
Q: Does it support 100 V line operation?
A: The optional WTR06 transformer is listed as a 6 W, 100 V line accessory. Confirm compatibility and installation requirements before use.
Q: Is the WTR06 transformer included?
A: No. It is listed as optional; ask BME whether it is available with the speaker.
Q: Can I use it on a 70 V line?
A: No 70 V transformer operation is specified in the supplied information. Do not assume it is supported.
Q: What are the speaker’s power ratings?
A: The listed figures are 10 W RMS/AES, 20 W program and 40 W peak. These ratings are not interchangeable.
Q: What connection does it use?
A: A 2-pin Euro terminal block is specified. Confirm the wiring and amplifier configuration before installation.
Q: Is the speaker waterproof?
A: It is listed as IP40, which does not indicate water protection. Do not assume it is suitable for wet or exposed locations.
Q: What are its dimensions?
A: The supplied dimensions are 80 × 136 × 115 mm (W × H × D).
Q: What warranty is listed?
A: A three-year brand warranty is listed in the supplied information. Confirm its terms with BME.
✅ Why Buy This Product
Consider the Audac ATEO2/B if you need a compact wall speaker with a 2-inch aluminium full-range driver and CleverMount mounting. Its listed dimensions, orientation options and dispersion figures offer useful points for assessing it against a room layout. The optional WTR06 transformer may suit a 6 W, 100 V setup if compatibility is confirmed.
Before choosing it, verify whether the listed 8 Ω specification applies to the /B model, check the amplifier and connector requirements, and confirm whether the optional transformer is needed. Remember that IP40 does not indicate water protection. For current product information and ordering details in Bangladesh, contact BME and confirm the exact model, package contents and applicable terms. If the verified details suit your installation, enquire with BME about the ATEO2/B.
Have question about this product? Get specific details about this product from expert.